Click image to view full size image
Polyester Composite Strapping and lashing are the best secure systems to rear of the containers at present. With our Container bags, your goods will be extremely protected during the transport.
The Polyester Strapping is designed to protect your employees and customer from injuries while providing maximum load containment strength. There are no sharp edges when cut, and it does not spring back like steel banding. This quality offers protection for employees, customers and machinery, while giving you an inexpensive alternative to steel strapping.
The Polyester Strapping as strong as steel with comparable break strengths to conventional steel banding. Due to the elongation properties and shock absorbance capacities, The Polyester Strapping requires more energy to break. It is also five times lighter allowing for ease and flexibility of use.
The Polyester Strapping features a steel wire buckle, the strongest joint available which can be re-tensioned if required. The strap and buckle can be re-used in some applications.
Product parameter:
19mm Composite polyester strap
| Name |
Type |
Width (mm) |
Length per coil (M) |
Linear break (daN) |
System break (daN) |
Coils per pallet |
G.W/Box (kg) |
Coils/ per pallet |
Buckle |
|
|
QY-CS-60 |
19mm |
600 |
500 |
800 |
2 |
17.7 |
90 |
19*4.0 |
|
QY-CS-65 |
19mm |
500 |
700 |
1120 |
2 |
18.4 |
90 |
19*4.0 |
|
|
QY-CS-69 |
19mm |
450 |
880 |
1400 |
2 |
19.9 |
90 |
19*4.5 |
Buckle tensioning display:
Application examples
Packing Show:
Shipping and after-sale service
Company information:
What to do when PET steel strapping is slipping when in use?
PET steel strapping is loved by the packaging industry for its many reasons, such as durability and affordability. But occasionally users and PET steel strapping manufacturers reflect that there will be slipping when packaging some products, what is the reason?
We all know that slipping is due to reduced friction, so we should increase the pressure and friction.
When we are loosening some things with PET steel strapping, such as when the wood and mechanical packaging slips, then we can use the plier's clip to close the smash, release the pressure and pliers side and smash the clip again. If the clip breaks flat, move to the next clip and smash each clip off to prevent any loose PET steel strapping. This situation is mainly caused by the looseness of the joint.
It is recommended that we check first when using it.
http://www.polystrapfactory.com/